Tormax Folding درب اتوماتیک شیشه ای تورمکس چندلنگه

 

Easy Movement withSpace-Saving Doors

If neither a sliding door nor a swing dois feasible in internal areas on accountof a lack of space, then the FOLDDOOSystem TOP automatic folding door forms the ideal solution.
With its two installation variants – it caeither be installed in a door opening orsupplied as a set-up assembly – and ielegant folding principle, the TOP System becomes a real space-saver; andis especially suitable for subsequent installation in conversions or renovations
This ready-to-install compact solution – with its pre-fabricated door system made from special, beautifullyfitting profiles – will captivate you with its elegant appearance. Aluminium profiles, which are free from jamming and catching and come complete with integrated sealing lips, form an optimudoor seal and avoid draught problems.

Standard Functions

Automatic acquisition of system-specific data for constant course of motion
Permanent operating diagnosis
Recognition of obstacles in closing and opening direction with safety hold-open time and sensing run
Automatic opening enlargement on people cross traffic
Winter opening with reduced hold-open time

Accessories / Options

TORMAX control panel – with operating modes: OFF, AUTORED (winter), AUTO (summer), EXIT, OPEN – parameter adjustment for: opening and closing speed, individual hold-open times for summer and winter, reduced opening width – reset and free-wheeling functions – fault diagnosis display – code lock
Control panel lock with cylinder
Electromagnetic lock with position monitoring and manual disengagement inside and out side
Emergency opening facility with rubber spring or battery module
Key switch, impulse, presence or safety sensors for 24 V DC
Emergency-off switch
Monitored safety light beams
Interface for connection to a building management system via TORMAX UNICOM
I/O modules for direct control and monitoring of the system

Standards

CE-Conformity
Manufactured according to ISO 9001

Technical Specifications

Door leaf weight ≤ 2 × 80 kg
Passage width 800 – 1400 mm
System length min. 1140 – 1740 mm
Header cross-section (H × D)
120 × 250 mm
Opening speed* 60 – 160 cm / s
Hold-open time 0 – 10 s (320 s)
Mains supply 115 V AC / 60 Hz or 230 V AC / 50 Hz, 160 VA

*maximum speed dependent upon the leaf’s weight and the prevailing regulations